Hydrotechnik home

DATA SHEETS
Sensors
PR 400 Data Sheet 

Pressure Sensor HySense® PR 400

The pressure sensor HySense® PR 400/ PR 410 is a High-End Sensor for the use within Mess-Sets of the MultiSystem 5060 Plus and 8050 family. With measurements of around 10.000 values per second it is especially suited for the measurement of pressure peaks. HySense® PR 400/ PR 410 sensors are smaller than the sensors of the PR 300 series. In addition, it is available with Hydrotechnik ISDS, the automatic sensor detection system. It has a protection type of IP 65 (with connected measurement cable). You can get HySense® PR 400/ PR 410 from 0 until max 60 bar (orange), from 0 to max 200 bar (yellow), from 0 to max 400 bar (blue) as well as 0 to max 600 bar (green). The different colors are made for easy application and identifying the sensors.

  •    -  Piezoresistive pressure sensor
  •    -  Pressure connector G1/4” ISO 228
  •    -  Circular connectors M16 x 0.75
  •    -  Output signal: 4 ... 20 mA

 

 



It is available in several pressure ranges from -1 to 1000 bar.

PR400 ( ISDS ) PR410 ( non ISDS )
34P3-18-S-01.37A2    -    0…600bar   34P3-18-01.37A2    -    0…600bar
34P3-15-S-01.37A2    -    0…400bar   34P3-15-01.37A2    -    0…400bar
34P3-10-S-01.37A2    -    0…200bar   34P3-10-01.37A2    -    0…200bar
34P3-21-S-01.37A2    -    0…60bar   34P3-21-01.37A2    -    0…60bar